LED Floodlight installation method
LED Floodlight is suitable for all kinds of architectural lighting projects; indoor lighting; all kinds of stages, performances and entertainment venues.
LED Floodlight installation method
How to install LED Floodlight?
Before installing LED Floodlight, in order to ensure the quality of its use after installation, it is therefore recommended to conduct a detailed inspection of the arriving floodlights before installation, to see whether the appearance of LED Floodlight is damaged, whether the accessories are complete, how the after-sales service, etc., each of which should be carefully checked when. If the power line is protected by steel pipe, the lead is protected by metal hose, and the junction is protected by waterproof junction box. After the wiring is completed, the edge of the waterproof junction box is glued or waxed and sealed, buried in the soil, and under the appropriate gravel pad (waterproof, costly and relatively complicated process).
After the appearance of no damage and accessories are complete, the LED Floodlight to the site after the preparation of installation, first in accordance with the factory attached installation drawings, the installation staff organized, first connected to a few LED Floodlight to try the installation drawings correct or not, if there are conditions can be arranged for a person one by one test light, to avoid getting installed upstairs after a bad, and to Take down. If the power cord is protected by PE or PVC, the lead is protected by plastic hose, the junction is protected by plastic junction box, buried in the soil, and under the appropriate gravel pad, this practice is less waterproof, but the cost is lower and easy to install.
In all LED Floodlight are done after the trial light, try to light more time, the next day, the third day to review the next, so done after all is good, there will be no problems later. If the schedule is tight or can not avoid the joints exposed, it is necessary to prevent water glue + insulation glue + waterproof glue + insulation glue + waterproof glue when wiring, five layers of alternating protection. Joints facing up, shall not be placed on the ground or underground, so that the joints from the ground water, to prevent leakage of electrical conductivity (exposed joints need to be controlled in the shrub area inaccessible to human hands).
Installation precautions
Please read the LED Floodlight manual before use.
Please do not repair or modify the product without professional technical personnel.
Please close the power supply before installation to avoid improper operation and electric shock.
Before installation, please pay attention to check whether the voltage marked on the floodlight and the input voltage to be connected are common, to avoid damaging the LED Floodlight.
If you find that the light body wire is broken, please immediately disconnect the power to stop using.
